Archive for the 'Basso' Category

Bike Porn #2 1999 Basso Loto

Published on April 8, 2009 in Basso, Basso Loto, campagnolo, Carbon, centaur, FRM, Ksyrium, Loto and Mavic. Closed

I’m really excited about this Basso. The frame is a 1999 model, bought NOS about a year and a half ago from a chap in the UK which I heard about on a bike forum. I also got my ’89 Bottecchia frame from him as well. This’s a lugged frame (except the seat stays, which are fillet brazed to the seat tube), made out of custom Dedacciai 18MCDV6 H.T. steel tubes, specially drawn for Basso. 18MCDV6 H.T. is somewhat similar to Reynolds 853 and is now marketed as Dedacciai EOM 16.5 or SAT 14.5, not really sure which. http://www.bringheli.com/dedacciaisteel.html. Course I’ll probably get read the riot act by some bike nerd who’ll tell me that it’s nothing like Reynolds 853….
It’s not a light frame by modern standards, however the Loto model was designed by Basso for the slightly porkier rider, i.e. Me, so is a beefy frame. As such, I want to get the finished weight as low as possible, within financial reason.
Anyway, frame & forks as purchased, came still wrapped in the Basso factory wrapping:

I picked up a carbon Dedacciai fork with the correct 1″ steerer to replace the original and very heavy Basso steel forks:

Mounted with a Deda stem and Mavic Ksyrium Equipe wheels (taken from my Trek 1000, only about 200km on them):

FSA Wing bars mounted, along with a fantastic NOS 1″ Campagnolo Record Threadless headset and 2009 Campagnolo Centaur Ultrashift brake/gear levers:

FRM CL2 billet aluminium calipers – a work of art and a whopping 100g lighter than Campagnolo Centaur calipers. Wheels currently have Conti Ultra Gator Duraskin tyres which I’ll swap out for a set of folding tyres of the same model, saving another 160g weight:

Detail shot of rear of the calipers, showing the milled out sections to lighten the calipers:

Campag Centaur carbon rear derailleur, medium cage:

I bought the medium cage version as I’ll be fitting compact cranks. I’ve picked up a carbon FSA SL-K crankset, which I’ve had a spot of bother fitting. I dropped the frame into my LBS to get the BB shell prepped, but when I assembled the crankset in to it, the cranks didn’t turn smoothly at all. Back to the LBS to rectify, tapping and facing the BB shell again. However when he re-assembled the crankset to the frame he made complete shit of the self extracting crank bold and the spindle o-ring seal for the bearings. That was a couple of weeks ago, and I’m still waiting for him to source a replacement o-ring seal, before I can re-assemble myself.
That’s all the progress for now, more as I make it. Next up is seat post (been through two already which won’t fit, seems like a real odd ball size), fit the crankset, fit all the cables and it’ll be nearly finished!

Bike Nerd? You better believe it!!

Published on March 7, 2009 in Basso, bicycle, bottecchia, campagnolo, centaur, deore, dura ace, fixie, mtb, nos, Raleigh, road bike, Trek and ultegra. Closed

So it’s time to out my other little fetish in life, apart from cars and dressing in neoprene rubber that is. Bicycles. I’ve gone through quite a few over the years, from my first, a metallic green Raleigh Chico, a Raleigh Bomber (realistically the first mountain bike style bicycle available in Ireland), through a Raleigh Equipe racer and then a Raleigh Mirage MTB. Since Raleigh Ireland went down the tubes I’ve moved to Trek for my follow-on bikes, with a Trek 6500 MTB and a Trek 1000 racer.

The current stable comprises the following:
  • What’s left of the Raleigh Mirage – not much really….The front wheel & hub, the handlebars & stem. Broke the original purple Mirage frame twice. The first time it was a simple crack around where the rear righthand side dropout is brazed into the chainstay. Simple re-braze and touchup paint. Second time was when the seat stay came away from the seatpost. This time Raleigh, after much cajolling replaced the frame & forks with what you see before you now. Over the time I’ve had this bike I’ve changed just about eveything on it bar the front wheel & hub, the handlebars & stem. And the stem is about to be changed to a nice shinny Marin cro-mo item. I even have some NOS Deore DX front and rear derailleurs to go on it to complete the DX themed geartrain along with NOS Deore DX front & rear hubs. Also love the Deore DX brake and shifter combos, so much better than anything at the time or than XT which replaced it (I have a spare set of NOS DX ones in the same cupboard as the other DX bits). I’ve upgraded the brakes to bling purple anodized Dia Compe 987 cantis. Funny thing is, I bought the Trek 6500 to replace this bike a few years ago, and it’s this bike that I still prefer to cycle around on. Go figure. Steel is real!

  • The 2006 Trek 6500

  • The 2007 Trek 1000 (modified but about to give up all of it’s goodies to my current project). I’ve changed the bars to FSA OS Aero Wing bars, ITM 100mm stem, Specialized Avatar BG saddle, Mavic Ksyrium Equipe wheelset and it’s got a Polar CS200 HRM mounted.

I’ve also built a bike or two from parts – a Concorde steel frame & Paganini fork combo (sold immediately after build up) and my current project, which the Trek 1000 is donating it’s choicest upgraded parts to, a Basso Loto steel frame with a set of Dedacciai Black Force 2 carbon forks in place of the original steel forks. The next project after that will be building up my 2003 Cannondale Jekyll frame into a complete bike and I might change the Trek 1000 in to a Speed Bike/hybrid with flat bars :o)

Then there’s my collection of classic parts – 8 speed Dura Ace groupset parts, 8/7 speed Ultegra groupset parts, misc. Campagnolo parts, mostly NOS, a NOS Bottecchia Corsa frame made from Columbus SL tubing:

A badly rusted Concorde frame, also made with Columbus tubing. The top tube needs to be replaced, but I’m loath to do it as the Concorde name is pressed into the tubing just ahead of where it enters the lug on the seat tube. So I’d obviously loose that feature on this frame by replacing the top tube. Fork crown has been badly taken down with a file to allow crown races to fit, unforetunately it’s been taken down so much that the crown race just flops about in it’s seat. Now I could get new metal added back to the crown and then have it machined to the correct size when I’m having the top tube replaced, but I might as well be honest with myself – perhaps a hasty burial in the local recycling centre might be more appropriate….